Rheem - Air Handler, PSC Motor, 30,000 BTU/H, Front Return, Aluminum Coil, Efficiencies to 14.5 SEER

 Rheem RF1P- Series Air Handler Features:

• Front or Bottom Return with aluminum tube and fin coil
• Flow Check Piston for cooling or heat pump operation
• Wall-hanging brackets
• Built in Filter Rack
• Suitable for R-410A or R-22 Refrigerants (RF1P Only)
• AHRI Certified
• UL Certified
• Molex Plug Connections for field installed heater kits
• Dual Voltage Direct Drive Blower with multi-speed motor
• Thermoplastic Drain Pan with bottom primary and secondary connections
• Factory Installed Condensate Float Switch which shuts off the outdoor unit in event the condensate pan becomes clogged
• Optional Decorative Grill available (not included) for front return applications

Engineering Features

• The most compact unit design available, all standard heat air handler models only 36" [915 mm]
• Rugged wall steel cabinet construction, designed for added strength and versatility.
• 1.0" foil faced insulation for excellent thermal and sound performance.
• Four leg blower motor mount.
• Traditional open wire element design for heat applications.
• Indoor coil design provides low air side pressure drop, high performance and extremely compact size.
• Coils are constructed of aluminum fins and internally grooved aluminum tubing.
• Molded polymer corrosion resistant condensate drain pan is provided for all indoor coils.
• Connection point for high voltage wiring is inside the air handler cabinet. Low voltage connection is made on the outside of the air handler cabinet.
• Concentric knockouts are provided for power connection to cabinet. Installer may pull desired hole size up to 13/8 inch inches [35 mm] for 7/8 inch [22 mm] conduit.