Rheem 1.5 Ton, 14 SEER, Heat Pump Split System

 Standard Features:

• Rheem Efficiencies: 14 SEER/11.5 EER 8.2 HSPF
• New composite base pan
• Improved tubing design
• Optimized defrost characteristics
• Powder coat paint system
• Optimized reversing valve sizing
• Enhanced mufflers
• Scroll compressor
• Modern cabinet aesthetics
• Curved louver panels
• Optimized fan orifice
• Rust resistant screws
• PlusOne Expanded Valve Space 3 4 5 service valve space
• Integrated heat pump lift receptacle allows standard CPVC stands to be inserted into the base
• PlusOne Triple Service Access 15 wide, industry leading corner service access
• Diagnostic service window with two-fastener opening
• External gauge port access
• Single-row condenser coil
• 35% fewer cabinet fasteners and fastener-free base
• Service trays
• QR code
• Fan motor harness with extra-long wires

The Rheem RH1T Air Handler with a PSC Motor comes with a versatile 4-way convertible design for upflow, downflow, horizontal left and horizontal right applications. It includes a factory-installed indoor coil. Its sturdy cabinet construction with 1.0 inch [25.4 mm] of foil faced insulation for excellent sound and insulating characteristics. Kits include circuit breakers which meet U.L. and cUL requirements for service disconnect.

Standard Features:
 

• The most compact unit design available, all standard heat airhandler models only 42 1/2 to 55 1/2 inches [1079 to 1409 mm] high.
• Attractive pre-painted cabinet exterior.
• Rugged wall steel cabinet construction, designed for added strength and versatility.
• 1.0 foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance.
• Four leg blower motor mount.
• Blower housing with controls, motor and blower. Slide out design for service and maintenance convenience.
• Traditional open wire element design for heat applications.
• Field convertible for vertical downflow, horizontal left hand or right hand air supply.
• 3 combustible floor base accessories fit all model sizes when required for downflow installations on combustible floors.
• Indoor coil design provides low air side pressure drop, high-performance and extremely compact size.
• Expansion valve on indoor coil provides for operation with air conditioning.

Cabinet Features:
 

• Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing.
• Coils are tested at the factory with an extensive refrigerant leak check.
• Coils have copper sweat refrigerant connections.
• Coils utilize chatleff metering device connections.
• Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils.
• Supply duct flanges provided as standard on air handler cabinet.
• Provisions for field electrical, connections available from either side or top of the air handler cabinet.
• Connection point for high voltage wiring is inside the air handler cabinet.
• Low voltage connection is made on the outside of the air handler cabinet.
• Concentric knockouts are provided for power connection to cabinet.
• Installer may pull desired hole size up to 2 inches, 51 mm, for 1 1/2 inch, 38 mm conduit.
• Front refrigerant and drain connections.